Two Women Exchange Blows Over A Man During Football Match

Football fans were treated to a free wrestling show at the 2015 Koth Biro finals at the Ziwani Grounds, Nairobi, Kenya, over the weekend.

According to witnesses, the two ladies warmed up for the wrestling bout by hurling insults at each other over a man, and went full on WWE when the verbal missiles were not having the desired effect on each other.

See more photos after the cut

 

 

 

I really hope the man was worth this show of shame…

Read More

How To Update Your Tecno H6 To The Latest Rom To Get 5gig Storage Space

Tecno H6 Latest Firmware/ Version 5g [Stock Rom ]

To all Tecno H6 users, this post was specifically made for you guys. I assume we all know that Tecno H6 is of two version or type, the OLD VERSION/ FIRMWARE:  Build Number: H6-G325-20140923 has 2gb allocated free space for use and also the NEW VERSION/ FIRMWARE: Build Number: H6-G325-20150122S which comes with 5gb free space for use. Well, To get this new version Rom on your phone you will have to flash the new update Note: Your data will not be lost however, we would advise you to take a backup before proceeding to the following steps

Frequently asked questions:

 ANY BUG?

• Not at all, everything's working perfectly.

IS IT A CUSTOM ROM?

• NO, it's Tecno H6 official latest stock firmware/ version.

WHAT'S IS THE NEW FIRMWARE/ VERSION?

• 5gb free space for your use and other noticeable changes

STEPS.
1.Download  Tecno H6 Stock Rom Download Android Driver  and SP Flash Tool For flashing the Update
Do This First Before Flashing Rom ( Install Preloader Usb Vcom Drivers On Your Pc)
2. Unzip the downloaded files. You can use software's like WinRAR or 7Zip to do that, if required.
3. Open “Android Driver” and double click on
4. If your phone is connected to the PC via USB, remove it before proceeding to the next step

5. Open folder named “Flash Tool” and double click on “Flash_tool ” application file.

7. Select “Scatter-loading ” option on the tool.

8. Select file named “ MT6582_Android_scatter ” from the firmware folder

9. Click on “Firmware-Upgrade ” option on the top as shown below & then select Download

10. Connect your  Tecno H6 with the USB cable provided by “ Tecno H6”, make sure your device is switched off before establishing connection with more 50% battery backup.

11. The upgrade process will be triggered and you would be able to see the following screen.

12. The following screen will appear, on completion of the upgrade.

CAUTION: DO NOT disconnect/ try to switch the device on while the upgrade is in progress.

13. Disconnect device and switch on your device again. Congratulations! You are now using the NEW VERSION/ FIRMWARE: Build Number: H6-G325-20150122S

Thank for visiting  Your comment will make us serve you better Don't forget to hit the share button.

Read More

How to install Preloader USB VCom Drivers MTK65XX On Your Pc

Install MTK65XX Preloader USB Vcom Drivers for SP Flash Tools in Windows
Day in day out guys flash their Android phone which get bricked due to one problem or the other Generally many users face the problem of VCom drivers not getting installed for their MediaTek device which will make your Sp flash not to response well when you want to flash your android, we require VCom drivers to be properly installed  when we want to flash firmware/Rom in our device with SP Flash Tools or any other similar tool. we will getting the best and easy way to install the VCom drivers

This Guide works with Windows XP, Vista and Windows 7 Based Operating systems,

How Best To Install USB VCOM Drivers :-  

 Step 1 :- You need to Download MTK USB VCOM Drivers for you device model click the below link.
MTK6582 /MTK6592 /MTK6589 / MTK6577 or any other MTK65XX

Step 2 :- Now open Device Manager in your PC by clicking the window button and typing the device manager

Step 3 :- In Device Manager click on your PC name and then click on Add legacy hardware, as see below screenshot.

Add legacy hardware

Step 4 :- Now in Add Hardware Wizard click on Next to continue as see below

Step 5 :- Click the Install the Hardware that i manually select from a list (Advanced) 

Step 6 :- It will Show All Devices Click the Next button to continue.

 

Step 7 :- Click the Have a Disk button  now browse to the Vcom drivers you download make sure you have extracted it out from the zip select the inf file according to your PC bits the first inf file is for 32bit system while the second file is for 64bit then click open next click Ok.

Step 8 :- Now click on Next on the wizard to install the drivers and when promoted for security issue just click on install any anyway to finish the driver installation.

Step 8 :- It will install Drivers after that you will be ask to click finish and restore to make the drivers works

Congratulation you have successfully install VCom drivers in your pc you can now flash your firmware/Rom via Sp flash without getting any problem

Read More

How to Root Infinix Hot Note & Hot Note Pro 5.1 Lollipop

This tutorial will be helpful for those who have updated Infinix Hot Note or Hot Note Pro to lollipop who want to root their device again.

I want to believe that you already have all the files so long you are running 5.1 Lollipop on your hot note or pro device.

Requirements

==>SP Flash tool

==>Recovery Image (download here)

==>Super User SU (download here)

Procedures

==>Copy and extract the downloaded YP recovery.rar   on your PC

==>Copy the SuperSU to your SD card

==>Open your SPFlash tool and click on Scatter loading

==>Locate where you extracted the recovery you downloaded earlier on your pc and load the scatter file

Choose download only (See image below for guide)

Click on download (wait for the process to complete)

==>Unplug your phone and boot into recovery by pressing Volume UP+ Power or VolDown+Power until you see Philz Touch Recovery.

==>Click Install Zip from SD CARD.

==>Install the UPDATE-SuperSU-V2.46.zip you placed on your sd card earlier.

==>Reboot System Now

Congratulations! Your device is now rooted. If you are still confuse, please use the comment box below.

Read More

How to Upgrade Infinix Hot Note Pro x551 & Infinix Hot x507 to Lollipop 5.1

I know a lot of Infinix hot note pro and infinix hot x507 are tired of waiting for Lollipop update since its already available for infinix hot note. However, I’m going to share with you in easy steps how you can update your Hot note pro and Hot x507 to lollipop 5.1

The truth is you can actually get a lollipop OTA update if you follow me carefully.

 Before you get the OTA update, you will need to first of all flash 0730 ROM on your device. All thanks to Infinixmobility forum and Vipelshaer for the provision of this Lollipop ROM.

Requirements

==>You must be running on stock recovery on Infinix hot x507 and Infinix Hot note pro (download stock recovery for infinix hot note pro here)

==>You must have a PC with SP Flash tool installed.

==>First of all flash 0730 ROM version to your device via SP Flash tool which is downloadable (for Infinix hot note pro only) Download the rom here

==>Download Vcom Port driver here

==>Download SP Flash tool here

==>Make sure your phone is charged 90%

==>Back up your files and contact to avoid stories that touch

 

==>For Infinix hot users onlydownload this rom here 

How to Upgrade Infinix Hot Note Pro & Infinix Hot to Lollipop 5.1

==>INSTALLING VCOM DRIVER

1. Extract the downloaded vcom driver.

2. Go to device manager>click action>click add legacy hardware

3. Under welcome to add new hardware click next

4. Select advanced option and click next

5. Select ‘show all devices’ and click next.

6. Click have disk

7. Browse to your vcom extracted folder and select the driver setup up file and click    

open, then ok.

8. Select Mediatek preloader usb vcom driver and click next.

==>GET YOUR PHONE READY

1. Make sure phone has about 90% charge as well as your pc.

2. Enable usb debugging under settings>developer options

3. Connect to Pc…ignore any driver failure warnings.

==>FLASHING

1. Navigate to the sp flash tool folder

2. Run the sp flash tool.exe as admin

3. Click on scatter loading. Navigate to the infinix rom folder and select the scatter file

4. At the left hand side just below the 'scatter loading'  panel click on 'download now'  then change it to 'firmware upgrade' Restart your phone using the power button and wait. The phone

will be upgraded on booting-Make sure you don’t tamper with usb at this point.

5. The final result after about 5-10 min should be like this if all went well

6. After that confirmation close flash tool. Disconnect phone and switch it on. It will take some minutes before the setup is complete.

 

Finally,  once your device is turn on, go to 'system update' there you will see a new update available probably the 0813 version or the recent 0828 version, update it and the security guard at the gate will welcome you to Lollipop 5.1.

Note: You must be running a stock recovery or else you'll brick your device.

Read More

Infinix Hot Note Users - Infinix Releases Beta Lollipop Rom For Hot Note

Infinix mobility started rolling out the beta Lollipop update for Infinix Hot Note users as promised earlier. The update comes with Android Lollipop with a brand new UI that Infinix call XUI

The update brings new features and some improvement to the Infinix Hote Note device…

The new software comes with a refreshed user interface called XUI Beta, below is the full feature

 

1. Optimized UI display, XUI first beta release,

2. Added font management, theme management, online wallpaper function,

3. Added ultra power save function,

4. Added clear application function,

5. Video player added,
6. Optimized system performace,

7. Fixed issues,

8. Support OTA upgrade from 0730

Before You Upgrade Your Hot Note to Lollipop Via OTA

==>If you are upgrading via OTA update, first of all Backup  your device if its rooted

==> Unroot your device

==>Restore to factory setting (not too compulsory)

==>finally update your device.

Where Can I Download The Rom?

Download The Hot Note Lollipop Rom here or from Infinixmobility

How to Upgrade Infinix Hot Note to Lollipop Through SP Flash Tool

Requirements before proceeding.

1. Vcom port driver==>Click here to download

2. Infinix rom .zip file==>Click here to download lollipopfor infinix x551

3. Latest Sp flash tool==>Download here

4. A pc with healthy usb port and your infinix usb cable and full charge.

5. Obviously the infinix phone which should have a 90% charge.

6. Back up your files and contacts

==>INSTALLING VCOM DRIVER

1. Extract the downloaded vcom driver.

2. Go to device manager>click action>click add legacy hardware

3. Under welcome to add new hardware click next

4. Select advanced option and click next

5. Select ‘show all devices’ and click next.

6. Click have disk

7. Browse to your vcom extracted folder and select the driver setup up file and click    

open, then ok.

8. Select Mediatek preloader usb vcom driver and click next.

==>GET YOUR PHONE READY

1. Make sure phone has about 90% charge as well as your pc.

2. Enable usb debugging under settings>developer options

3. Connect to Pc…ignore any driver failure warnings.

==>FLASHING

1. Navigate to the sp flash tool folder

2. Run the sp flash tool.exe as admin

3. Click on scatter loading. Navigate to the infinix rom folder and select the scatter file.

4. Click on download. Restart your phone using the power button and wait. The phone

will be upgraded on booting-Make sure you don’t tamper with usb at this point.

5. The final result after about 5-10 min should be like this if all went well.

6. After that confirmation close flash tool. Disconnect phone and switch it on.

It will take some minutes before the setup is complete.

Read More

[Latest] Dual Whatsapp GBWhatsApp+ Plus v3.50 Xtreme apk

GB WhatsApp – Dual WhatsApp in One Phone

GBWhatsApp apk is another mod by GB Team that has all the features of GBWhatsApp in it but has the signature “com.whatsapp”.
This mod will suffice all the need that you require from themeing your whatsapp to customizing your privacy.
Enjoy it all in this new ‘GB’ WhatsApp Plus.

Features

•  privacy options
• antiban and lock with password
• possibility to distinguish between collective messages and regular
• possibility of a lock for Watts in August password
• the ability to send video size 30 MB instead of 16 MB
• ​​the possibility of sending 90 image at once without 10
• possibility of a case of the number of dependent characters 250 instead of 139 symbols
• the possibility of pressure on the links without storing the message sender or the number of the owner
• counter statistics for groups
• View the media without loading
• the possibility to hide the name and the date when copying two or more
• ability to copy case
• the possibility of changing the program format, and change the program icon and notices
• and many more feature

What’s New ?

• Add widget to hide and show Appear to become connected to
• add more than 7 new forms of bubble conversation and Sahan receiving and reading
• Add 02/02/31 option to change your online color now in talks
• Fixed a problem disappearance appearing in Conversation
• reform not to open the conversation in 8 option
• Other reforms

How to Install ?

1. Download and install the APK given below
2. Don’t need to uninstall original whatsapp and start using original and gbwhatsapp together
3. After that complete the setup and start using it. Enjoy !

Download Links: GBWhatsApp Plus v3.50 Xtreme APK

Screenshots

Read More